Komatsu WA800-3E0, Руководство по эксплуатации и техническому обслуживанию

Страница: 88 / 336

EXPLANATION OF COMPONENTS
OPERATION
3-26
TRANSMISSION AUTO SHIFT/MANUAL SELECTOR SWITCH
Press push button switch (6) to turn the switch ON or OFF.
When the switch is pressed once, the pilot lamp lights up and
the lamp is turned ON; when the switch is pressed again, the
pilot lamp goes out and the lamp is turned OFF.
Normally, keep the switch at the OFF position.
OFF: System is set to auto shift
The transmission shifts automatically according to the travel
speed. The maximum speed range selected for automatic
shifting is displayed by the 1st, 2nd, 3rd speed indicator lamp
at the bottom of the main monitor.
ON: System is set to manual shift
Use the shift up and shift down switches to select the speed range when traveling.
The 1st, 2nd, 3rd speed indicator lamp go out.
When the switch is set to the ON position, the transmission auto shift/manual selector pilot lamp lights up.
REMARK
The speed range after turning the starting switch to the ON position is the final speed range selected by the previ-
ous operation.
If the system is shifted from auto shift to manual shift, or from manual shift to auto shift when the machine is
stopped, the speed range is automatically set to 2nd.
ACTIVE WORKING SWITCH
Use this switch (7) to switch the condition of the machine to
match the purpose of operation.
Powerful Loading position: The drive force when digging
becomes larger. When the drive force is large, the work equip-
ment speed is slow, so this is suitable only for loading rocks.
Normal Loading position: The work equipment speed is fast, so
this is suitable only for loading products.