Komatsu WA800-3E0, Руководство по эксплуатации и техническому обслуживанию

Страница: 141 / 336

OPERATION
OPERATION
3-79
(M) Adjusting hardness of suspension damper
Operate knob (9) to adjust the damping force of the suspension
damper. If knob (9) is moved to face the front of the seat (A),
the damping force becomes stronger; if the knob is moved to
face the rear of the seat (B), the damping force becomes
weaker.
Amount of adjustment: 5 stages
ADJUST SEAT BELT
Always wear the seat belt.
WARNING
q
Before fastening the seat belt, check that there is no abnormality in the belt-mounting bracket or
mounting of the belt. If the belt is worn or damaged, replace it.
q
Fasten the seat belt before starting operations.
q
Always wear the seat belt during operations.
q
Make sure that the left and right belts are not twisted when fastening the seat belt.
FASTENING AND REMOVING BELT
Fasten the belt so that it is tight without being too tight.
1. Sit on the seat, depress the brake pedal fully, and adjust
the seat so that your back is pressed against the backrest.
2. Sit on the seat, pull the right belt, then insert tongue (1)
securely into buckle (2) until a click is heard. Pull the belt
to check that it is firmly locked.
3. When removing the belt, press the red button in buckle (2)
to free the belt.
Fit the belt so that it follows your body and is not twisted.