Komatsu WA800-3E0, Руководство по эксплуатации и техническому обслуживанию

Страница: 136 / 336

OPERATION
OPERATION
3-74
CHECK FUEL LEVEL, ADD FUEL
WARNING
When adding fuel, never let the fuel overflow. This may cause a fire. If any fuel is spilled, wipe it up com-
pletely. Never bring flames near fuel because it is highly flammable and dangerous.
NOTICE
If the engine has stopped after running out of fuel, it is necessary to use the priming pump to bleed all the
air from the fuel circuit before starting the engine again. For details of the procedure for bleeding the air
from the fuel circuit, see “PROCEDURE FOR BLEEDING AIR (3-144)“.
Be careful not to let the engine run out of fuel and stop.
If the engine runs out of fuel, fill the fuel tank before bleeding the air. This will reduce the time taken to
bleed the air.
1. Turn the engine starting switch to the ON position and
check the fuel level with fuel level gauge (G).
After checking, turn the switch back to the OFF position.
2. If the fuel level is low, add fuel through fuel filler port (F) to
fill the tank.
For details of the method for opening and closing the cap,
see “CAP WITH LOCK (3-43)“.
3. After adding fuel, tighten the cap securely.
Fuel capacity: 1555 liters