Komatsu WA800-3E0, Руководство по эксплуатации и техническому обслуживанию

Страница: 100 / 336

EXPLANATION OF COMPONENTS
OPERATION
3-38
WORK EQUIPMENT LOCK LEVER
WARNING
q
Always set the work equipment lock lever securely to the LOCK position when standing up from the
operator's seat. If the work equipment lock lever is not securely in the LOCK condition, and work
equipment control lever (A) is touched by mistake, it may cause serious personal injury.
q
If the work equipment lock lever is not set securely to LOCK position (L), the work equipment may
move and cause serious personal injury. Check that the work equipment lock lever is at LOCK position
(L).
q
When operating the work equipment lock lever, be careful not to touch work equipment control lever
(A).
This lever (3) is the lock device for the work equipment control
levers. Push the work equipment lock lever down to lock it.
REMARK
When work equipment control lever (A) is in any other position
than HOLD, the work equipment lock lever cannot be moved to
the LOCK position (L).
BUCKET CONTROL LEVER
This lever (4) operates the bucket.
Position (A): TILT
When the lever is pulled further from the TILT position, the
lever stays at that position (detent position), and returns to the
HOLD position when the
bucket reaches the position set for the bucket positioner.
Position (B): HOLD
The bucket is stopped and held in position.
Position (C): DUMP
Tilt
Dump