Komatsu WA800-3E0, Руководство по эксплуатации и техническому обслуживанию

Страница: 151 / 336

OPERATION
OPERATION
3-89
MOVING THE MACHINE (DIRECTIONAL, SPEED), STOPPING THE MACHINE 3
WARNING
q
Always remove the frame lock bar before traveling. If it is not removed, the steering will not work and
this may lead to serious personal injury.
q
When moving the machine off, check that the surrounding area is safe, then sound the horn and start
the machine.
q
Do not let any person enter the area around the machine.
q
Remove any obstacles from the travel path.
q
The rear of the machine is a blind spot, so when traveling in reverse, be particularly careful to check
that it is safe.
q
When starting the machine off on a slope, depress the left brake pedal, then depress the accelerator
pedal and slowly let the left brake pedal back to allow the machine to move off. This will prevent the
machine from running back down the slope.
q
While keeping the engine running at a high speed, do not shift the transmission to the FORWARD or
REVERSE position to start up the machine.
PREPARATIONS FOR MOVING MACHINE 3
1. Check that warning pilot lamp (1) is not lighted up.