Kolida KTS-470 R Series, Руководство пользователя

Страница: 23 / 216

23
laser EDM. The reflector can be set as Prism, Non-prism and Reflecting Sheet.
●Refer to “technical parameters” for the parameter of different reflectors.
Setting of illumination of cross hair:
●Move the stylus to adjust the brightness of crosshair.
L: Indicate that the crosshair is dim.
H: Indicate that the crosshair is bright
Move the stylus from left to right to change the brightness of the crosshair from dim to
bright.
Setting of signal mode:
The reflector return signal intensity was displayed in this mode. It will buzzer when
return signal from the prism was received. This function is more convenient for
collimation when the target is difficult to find.
The received return signal level is displayed with bar graph as follows.
No light acceptance Minimum quantity level Maximum quantity level
Setting of Laser Pointer and Laser Plumb: change the on/off and working time of
Laser pointer; set the on/off and intensity of the laser plumb (for 470RLC).