Kolida KTS-470 R Series, Руководство пользователя

Страница: 134 / 216

134
Explanation
：
Req
：
The required bearing angle from occupied point to setout point.
Turn
：
The angle that should be rotated. When it is 0, means the bearing angle is
correct.
Away
：
The distance from prism to setout point. Positive sign indicates that prism
should move far from instrument. Negative sign indicates that prism should move
towards instrument. The value means the distance to be moved.
Fd
↑ ：
It is the distance along the line of sight to the instrument and is positive away
from the instrument. Positive sign means the point is in front of sight line; Positive
sign means the point is behind sightline.
Right
→：
It is perpendicular to the line of sight with positive to the right when facing
the instrument. Positive sign means the point is in the right side of sight line; Positive
sign means the point is in the left side of sightline.
Cut
：
The elevation difference of the point. Positive sign indicates that this point is
higher than calculated value and it should be cut. Negative sign indicates that it should
be filled. The value is the fill-cut data value.
●Anytime you click “ ” on the upper right screen to return to Pt No screen, you can
input a new point and set out next point. Or click [List] to call up data stored in
internal memory. If the point is new, system will recommends you to input its
coordinate.
The ANGLE screen displays the required horizontal angle (Req),
the horizontal angle from the current to the setout point (Turn), the
distance from the prism to the setout point (Away) and the
difference in elevation (Cut).
The OFFSET display shows the distance from the measured point
to the required setout point in the form of offsets.