Kolida KTS-470 R Series, Руководство пользователя

Страница: 32 / 216

32
Make sure the mode is Angle measurement.
OPERATION STEPS KEY DISPLAY
①
Sight the first target A.
Sight target A
②
Set the horizontal angle of target
A as 0°00′00″.
Click [0 SET], press [OK] in the
pop-up dialog box to confirm.
[0 Set]
[OK]
③
Sight second target (B).
The screen displays the horizontal
and vertical angle of target B.
Sight B
How to collimate the targets (For reference)
①
Point the telescope toward the light
，
rotate the eyepiece ring
，
focalize the telescope so that
the crosshair is clearly observed
（
turn the eyepiece ring to you first and then to focus
）
.
②
Aim the target at the peak of triangle mark of the collimator. Keep a certain space between
the collimator and yourself for collimation.
③
Focus the target with the focusing knob until the target is clearly seen and its center is right
on the crosshair.
If parallax exists between the crosshair and the target when viewing vertically or horizontally
through the telescope, focusing is incorrect or diopter adjustment is poor. This adversely affects
precision in measurement or survey. So please eliminate the parallax by focusing and using
diopter adjustment carefully.
6.1.2 Switch Horizontal Angle Right/Left