Kolida KTS-470 R Series, Руководство пользователя

Страница: 73 / 216

73
④
Sight prism P3
，
Click [Measure]
to start measure.
[Measure]
⑤
Click [Continue] to calculate and
display coordinate and distance
value of cross point between
collimation axis and of the plane .
※
1)
[Continue]
※
1) To set instrument height or target height, click [Set].
●
In case the calculation of plane was not successful by the measured three points, error
displays. Start measuring over again from the first point.
●Error will be displayed when collimated to the direction which does not cross with
the determined plane.
7.7 PARAMETERS SETTING
In basic survey, some parameters can be set.
Communication Parameters
Factory default settings are indicated with underlines.
Menu Selecting Item Contents
1. Baud Rate 1200/ 2400/ 4800/
9600/19200/38400/57600
Select the baud rate
2.Data number 7 / 8 Select the data length seven digits or eight digits
3. Stop Bit 1 / 2 Select the stop bit.
4. Check Mode None/Odd/Even Select the parity bit.
5. ACK/NAK Yes /No
When communicating to an external device, the protocol for
handshaking can omit the [ACK] coming from the external
device so data is not send again.
Yes
：
Omit the [ACK]
No
：
Standard
Other Parameters