Kolida KTS-470 R Series, Руководство пользователя

Страница: 96 / 216

96
●It is possible to select whether the level of the occupied point, a scale factor or the
backsight bearing („Calculate Bkb‟) should be calculated. Furthermore it is possible to
select whether the calculated scale or the measurements which have been performed
(„Store res meas‟) should be stored.
● After setting, click [Enter] to return to the main resection screen, saving the changed
mode and (re)calculation of the occupied point, residuals and the required parameters.
Press [ENT] in the resection main menu will quit this function and save the
coordinates of the occupied point. In case „Store res meas‟ was turned on in [PARAM],
the measurements which have been performed and which are shown in the box will be
saved as well.
In case „Calculate Bkb‟ in [PARAM] was turned on, the backsight bearing will be
calculated and set by pressing [ENT] key and leaving the main resection screen. The
computation will use all measurements which are shown in the box. In order to
calculate a backsight bearing of high quality:
The residuals of the horizontal angle should have low values.
The user shouldn‟t change the horizontal angle when leaving the main resection
screen.
NOTE
：
1) The measurements can be performed in any order. The point numbers shown in the
box in the main resection screen will be sorted by horizontal angle.
2) When 3 points are used for resection using angle measurement only, you must
consider the “danger circle.”