Koden MDC-5004, Инструкции по эксплуатации

Страница: 76 / 192

Chapter 2 Radar Basic Operation MDC-5000 Series
0093153004-00 2-38
2.26 Echo color rejection
This radar has a function to remove a color selected by menu operation.
This effect is to show the strong signal image clearly and to delete the unwanted signal such as noise.
1
Press MENU
key to display “Menu”.
Select [ECHO] => [COLOR REJ] => select [OFF] or [1 to 14], and press ENT key.
Selection value 1: Lowest signal level color
Selection value 14: Highest signal level color
2.27 Pulse width
This radar can change pulse width of the transmission from 0.25NM to 12NM range scale.
SP and LP pulse width can be set separately.
The pulse width in use is displayed at the upper left of the display, using the indications shown in the
table below.
1
Press MENU
key to display “Menu”.
Select [ECHO] => [PULSE WIDTH] => select range scale (0.25 to 12 NM) => select [SP] or [LP]
=> set pulse width, and press ENT key.
If set at 5, echo colors from 1 to 5 will not be
displayed.