Koden MDC-5004, Инструкции по эксплуатации

Страница: 115 / 192

MDC-5000 Series Chapter 6 Map operation
0093153004-00 6-1
Chapter 6 Map operation
6.1 MAP function display ON or OFF
This is to turn ON/OFF the entire MAP function.
1
Press MENU key to display
“Menu”.
Select [MAP] => [MAP DISP] => [ON], and press ENT key.
It is not displayed as well as HL while OFF key is pressed.
This operation links the functions, COAST LINE, NAV LINE, ROUTE, EVENT MKR and AREA.
6.2 OWN SHIP PAST TRACK
OWN SHIP PAST TRACK consists of 2000 points x 10 blocks. This is to set up OWN SHIP PAST
TRACK, record ON or OFF, display, clear operation, color setting and line style for each block, and set
up recording interval common to all blocks.
Record / Display of Own ship past track is set for each block.
1
Press MENU key to display
“Menu”.
Select [MAP] => [OWN TRACK] => select [TRACK0 to TRACK9] => select [OFF], [ON] or [DISP],
and press ENT key.
1. Setting
2. Record / Display of Own ship past track
3. OFF
4. Own ship past track is not recorded.
5. Own ship past track is not displayed.
6. ON
7. Own ship past track is recorded and displayed.
8. When own ship past track record will be full in a block, it continues to be
recorded in the next block set to [ON].
9. When all the blocks set to [ON] will be full, own ship past track record will
overwrite previously written data.
10. DISP
11. Own ship past track is displayed.
12. In the block set to [DISP], own ship past track will not be recorded.
CAUTION: Factory default settings: All blocks are set to [OFF].
When one of the blocks is set to [ON], the own ship past track message is displayed on the lower
left of the display, and it is possible to record the own ship past track.
Recording Recording stop