Koden MDC-5004, Инструкции по эксплуатации

Страница: 116 / 192

Chapter 6 Map operation MDC-5000 Series
0093153004-00 6-2
When the recording of the own ship past track is started, move the cursor to the STOP of the OS
PAST TRK at the lower left of the display, and press the ENT key. When the recording of the own
ship past track is completed, move the cursor to the REC of the OS PAST TRK at the lower left of
the display, and press the ENT key.
To restart recording, move the cursor to STOP and press the ENT key.
You can easily change it when you set [OS PAST TRK REC] function to the function key. (Refer to
“2.20 Function key usage”)
2
Select [PLOT INT] => and press ENT key after selecting the set up value.
Selection values: 1sec, 2sec, 5sec, 10sec, 30sec, 1min, 3min
3
Select [STYLE] => select [TRACK NUMBER (0 to 9)] => select [COLOR] => select color from eight
colors => press ENT key.
PAST TRACK of the selected block will turn selected color.
4
Select [STYLE] => select [TRACK NUMBER (0 to 9)] => select [STYLE] => select past track line
style* => press ENT key.
How to Clear OWN SHIP PAST TRACK
1
Press MENU key to display
“Menu”.
Select [MAP] => [OWN TRACK] => [CLEAR] => select [TRACK NUMBER (0 to 9)] => [GO], and
press ENT key.
PAST TRACK of the selected block will be cleared.
6.3 Target track past position display
This is to set up TT past track position display, display ON or OFF, clear operation, color setting, select
track style, plot interval and maximum plot numbers.
1
Press MENU key to display
“Menu”.
Select [MAP] => [TARGET TRACK] =>
2
Select [TARGET TRACK] => move joystick to right, select [1 to 100], and press ENT key.
3
Select [DISPLAY] => [ON], and press ENT key.
4
Select [CLEAR] => [GO], and press ENT key.
The past track of chosen TT will be deleted.
5
Select [COLOR] => select color from eight colors => press ENT key.
TT past track will turn selected color.
*Line style: