Koden MDC-5004, Инструкции по эксплуатации

Страница: 107 / 192

MDC-5000 Series Chapter 4 Target (AIS and TT)
0093153004-00 4-13
Enable TT function
This is to enable TT function.
1
Press MENU key to display
“Menu”.
Select [TARGET] => [TT] => [TT] => [ON], and press ENT key.
Note:
• Pressing ACQ key in [OFF] state automatically turns to [ON] state.
• TT function does not work due to incompleteness of input sentence.
• TT (ATA) is effective by using TT in combination with [INFO DISP].
Manual acquisition
1
Move cursor to a target to be acquired, and then press ACQ key.
A broken circle symbol is displayed at the cursor location, and acquisition starts.
About 30sec. from 1min. later, a broken circle symbol turn into a thick solid line, displayed vector of
target
’s motion trend and TT ID number (if selected), and displayed within 3min. the target’s
prediction motion.
Target Cursor
ACQ key
Broken circle
1
1
1
TT ID number (1 to 50)
Refer to 4.1 Common setting
“Set AIS/TT ID DISP TYPE”
and
“Set ID DISP SIZE”.