Koden MDC-5004, Инструкции по эксплуатации

Страница: 63 / 192

MDC-5000 Series Chapter 2 Radar Basic Operation
0093153004-00 2-25
PI
000.0° 3.000NM
PI REL PI
000.0° 3.000NM
PI REL
HALF
FULL
2.15 Measurement of distance/bearing by PI
This function is used to display straight Parallel Index (PI) lines on one or both sides of the vessel,
range and bearing of which can be manipulated by following procedures.
PI display side setting
1
[NAV TOOL] => [PI] => [PI DISP SIDE] => select [HALF] or [FULL], and press ENT key.
PI line number setting
1
[NAV TOOL] => [PI] => [CURSOR] => select [NORMAL], [1], [2], [3], [4], [5], [6] or [7], and press
ENT key.
NORMAL: PI line number is equal to range of range ring. Variable range is min: equal to range ring
one, max: 50% of selected range.
1 to 7: Designated number of PI is displayed. Variable range is min: 0, max: about 1.6 times of
selected range.
Operation
1
Press VRM knob, and PI lines are displayed.
Bearing is displayed by figure on middle lower left of the display, and distance between PI lines is
displayed on middle lower right of the display during PI is displayed.
2
Turn the VRM knob to change the interval between lines.
3
Turn the EBL knob to change the bearing.