Koden MDC-5004, Инструкции по эксплуатации

Страница: 168 / 192

Chapter 11 Appendix MDC-5000 Series
0093153004-00 11-12
Other special key operations
1. The menu being setup to Function key is displayed.
2. Start target track.
3. Finish target track.
4. After initialized, and power off.
No. Key operation Function
1
Long press the Function key to be
registered.
(F1, F2, F3 keys, RAIN, SEA,
GAIN knobs)
(Shortcut method to setup of Function
keys)
The menu being setup to Function key is
displayed.
(Refer to 2.20 Function key usage)
2
Move cursor to AIS or TT (ATA) target to
display track. And press ACQ key while
pressing ENT key.
Start target track.
(Refer to 6.3 Target track past position
display )
3
Move cursor to AIS or TT (ATA) target to track
off, and press OFF key.
Finish target track.
(Refer to 6.3 Target track past position
display)
4
MENU + ENT key + Power ON
(Long press)
After message of
“INITIALIZING” appears,
release the keys.
After initialized, and power off.
Note: MAP, TOTAL HOUR and TX HOUR
are not initialized.
(Refer to 7.8 BACKUP of Setup data
“Parameter reset”)