Koden MDC-5004, Инструкции по эксплуатации

Страница: 36 / 192

Chapter 1 Display and Operation MDC-5000 Series
0093153004-00 1-8
1.3 Menu usage
Turn MENU on and off
1
Press MENU key,
“Menu” display on the lower left of the display.
2 “Menu” display is turned off by pressing MENU key again.
Select menu item
1
Press MENU
key and “Main menu” will show on the display. Select one of main menu items by
moving the joystick up or down.
2
Move the joystick to the right after making selection in main menu and the sub menu will show on
the display.
3
Select a sub menu item by moving the joystick up or down.
4
Move the joystick to the right after making selection in sub menu and value of selected item will
show.
5
Select desired value, then press ENT key.
Note: Pay attention that ENT key must be pressed for selected item to take effect.
6
Move joystick to the left to return to previous menu.
To exit from menu, press MENU key again.
<Example of menu display>
Note:
“Menu” setup value is stored in the non-volatile memory inside the radar. Therefore, no setup
operation is required after turning on.
MENU
ECHO
>
TRAIL >
DISPLAY >
ALARM >
TARGET >
NAV TOOL >
MAP >
BRILL >
SYSTEM >
MAINTENANCE >
>ECHO
PICTURE MODE
PICTURE1
PROC OFF
IR OFF
VIDEO CONTRAST 3
COLOR REJ OFF
PULSE WIDTH >
PICTURE RESET
>
OFF
C1
C2
C3
A1
A2
A2