Koden MDC-5004, Инструкции по эксплуатации

Страница: 118 / 192

Chapter 6 Map operation MDC-5000 Series
0093153004-00 6-4
ADD: Insert a position data. (CURSOR, BLOCK NUMBER)
DELETE: Delete a position data. (CURSOR, BLOCK NUMBER)
CLEAR: Clear a selected block number coast line data.
How to edit
(1) CURSOR OPERATION
1
Press MENU key to display
“Menu”.
Select [MAP] => [COAST LINE] => [EDIT] => [CURSOR] => select [1 to 10] => [GO] and press
ENT key.
2
Move cursor to first input position, then press ENT key. No.1 mark is displayed on the display and
numerical data is shown at coast line info area.
3
Move cursor to second input position, then press ENT key. No.2 mark is displayed, and a line is
generated from No.1 to No.2.
4
Move cursor to third input position, then press ENT key. No.3 mark is displayed, and a line is
generated from No.2 to No.3.
You can input up to 100 point. When input is completed, press MENU key. Mark number will
disappear.
5
Refer to 3.3 Nav line cross
“How to edit” for the procedures to make plural divided coast line in the
memory of same block number.
x: Block number
(1 to 10)
Press
MENU key
x-3
x-1
x-2
Edit of LAT/LON data, color setting
and delete function can be operated
directly using cursor with joystick in
this info area.
x-1
x-2
x-1