Koden MDC-5004, Инструкции по эксплуатации

Страница: 127 / 192

MDC-5000 Series Chapter 6 Map operation
0093153004-00 6-13
6.10 WPT ID DISP
This function when activated can display WPT name information from external device such as chart
plotter or GPS navigator. This applies to all waypoints from WPT and also ROUTE waypoints. When
[WPT ID DISP] turned on, ID information will be displayed next to waypoints and when turned off only
waypoints without ID information will be displayed.
1
Press MENU key to display
“Menu”.
Select [MAP] => [WPT ID DISP] => [ON], and press ENT key.
6.11 TARGET TRACK ID
When tracking a target and past target track is activated, each track will have a label number
associated with it. TARGET TRACK ID and the numbers will disappear or reappear with turning this
function
“on” or “off”.
1
Press MENU key to display
“Menu”.
Select [MAP] => [TARGET TARCK ID] => [ON], and press ENT key.
6.12 WPT FLAG
This function is related to MONITORED ROUTE function. When route or waypoint is inputted from
external device flag will be shown of first waypoint. When route and waypoint information is inputted the
first waypoint on a route takes priority and flag is displayed. Follow below procedure to turn [WPT
FLAG] on or off
1
Press MENU key to display
“Menu”.
Select [MAP] => [WPT FLAG] => select [ON] or [OFF], and press ENT key.
6.13 LAT/LON LINE
LAT/LON LINE is a function which when enabled displays geographical latitude and longitude lines on
the radar display. Follow below procedure to turn LAT/LON LINE on or off.
1
Press MENU key to display
“Menu”.
Select [MAP] => [LAT/LON LINE] => select [ON] or [OFF], and press ENT key.