Koden MDC-5004, Инструкции по эксплуатации

Страница: 179 / 192

MDC-5000 Series Chapter 11 Appendix
0093153004-00 11-23
11.4 Details of TT tracking data output
Data standard name: IEC61162-1 or IEC61162-2
Target data of the automatic tracking unit is provided via data connectors (J3/J5/J6) on the back
panel.
TTD Tracked target data
x*hh<CR><LF>
Check sum
Number of fill-bits, 0 to 5
Encapsulated tracked target data
Sequential message identifier, 0 to 9
Hex sentence number, 01 to FF
Total hex number of sentences needed to transfer the message, 01 to FF
TLB Target label
*hh<CR><LF>
Check sum
Additional label pairs (x.x, c--c)
Label assigned to target 'n'
Target number 'n' reported by the device
TTM Tracked target message
*hh<CR><LF>
Target Target Target UTC Check sum
distance course, label Reference Type of
from degrees Speed/ target=R, acquisition
ow n ship true distance null otherw ise A=Automatic
Target number, Target speed units, N Target status M=Manual
00 to 99 Time to CPA L=Lost R=Recorded
Bearing from ow n ship, (min) Q=Query
degrees true Distance of closest T=Tracking
-point-of-approach
x.x, x.x, N, c--c,
a, a,
hhmmss.ss,
a,
$ RATTM, xx, x.x, x.x, T, x.x, x.x, T,
$
! RATTD, hh, hh, x, s--s,
RATLB, x.x, c--c, x.x, c--c,
…x.x, c--c