Knauer BlueShadow 80P Скачать руководство пользователя

Страница: 49 / 74

6. Functionality tests

Note:

Standard processes regarding IQ and OQ in single devices may

be handled differently in individual cases.

6.1 Installation Qualification (IQ)

The customer may request the Installation Qualification, which is free of

charge. In case of a request, the technical support of KNAUER or from a

provider authorized by KNAUER performs this functionality test during

the installation.
The Installation Qualification is a standardized document that includes

the following:

Confirmation of flawless condition at delivery.

Check if the delivery is complete.

Certification on the functionality of the device.

6.2 Operation Qualification (OQ)

The Operation Qualification includes an extensive functionality test accor-

ding to KNAUER standard OQ documents. The Operation Qualification is

a standardized document and free of charge. It is not part of the delivery.

Please contact the technical support in case of request.
The Operation Qualification includes the following:

Definition of customer requirements and acceptance terms.

Documentation on device specifications.

Device functionality check at installation site.

To make sure that the device operates within the specified range, you

should test the device regularly. The test intervals depend on the usage

of the device.
The test can be carried out either by the technical support of KNAUER

or from a provider authorized by KNAUER (for a fee).

Test Intervals

Execution

Functionality tests

BlueShadow Pump 80P Instructions V7685

Содержание BlueShadow 80P











































































Результаты поиска

Содержание BlueShadow 80P

Отзывы:

Похожие инструкции для BlueShadow 80P

Бренды по названию

Популярные бренды

Knauer BlueShadow 80P, Инструкция по эксплуатации

Результаты поиска

Содержание BlueShadow 80P

Отзывы:

Похожие инструкции для BlueShadow 80P

Бренды по названию

Популярные бренды