40
Operation
BlueShadow Pump 80P Instructions V7685
5.8.2 Run program
Process
Figure
1.
Navigate to the program main screen via the
horizontal arrow keys .
2.
Move the cursor to the area behind the P, press
and type in the program number via the
numeric pad.
3.
Upon entering the program number, the pump
will start pumping in status hold, indicated by
the letter H at the upper left corner.
4.
Navigate the cursor with the horizontal keys to
the status symbol and press the upward key
to change the status from hold (H) to run (R).
The program starts running.
5.
After the program has been completed, the
display switches into the status end (E).
6.
Press to stop the pump.
5.8.3 Change program
When new values for the different program lines are entered, the old
values are overwritten.
1.
Select the menu
Program.
2.
Select a program number.
3.
Navigate to the desired line and value.
4.
Activate the numeric pad by pressing and enter a new value.
5.8.4 Delete program lines
1.
Select the menu
Program.
2.
Select the desired program number.
3.
Navigate to the to be deleted program line.
4.
Change the time value of the line to 0.000.
5.
Confirm with or deny with .
5.8.5 Delete a program
Process
Figure
1.
Select the menu
Program.
2.
Select the program 00.
3.
Activate the numeric pad by pressing and
enter the program number you wish to delete.
4.
You will be asked whether you really want to
delete the program. Confirm with or deny
with .
Procedure
Procedure