Kinco CD2S Series, Руководство пользователя

Страница: 37 / 111

37
d1.25 606C0010 Real_Speed_RPM Real speed (rpm)
Internal sampling time: 200 mS
d1.26 60F919 Real_Speed_RPM2 Real speed (0.01 rpm)
Internal sampling time: 200 mS
d1.27 60F91A10 Speed_1mS Speed data (inc/1 mS)
Internal sampling time: 1 mS
d1.28 60F60C10 CMD_q_Buff Internal effective current instruction
d1.29 60F61710 I_q Actual current
peak
rms
I
_
I *
2047
2
I q

d1.30 60F90E10 K_Load Load parameter
d1.31 301004 Z_Capture_Pos Position data captured by encoder index
signals
Parameter List: Group F002 (To Set Control Loop Parameters)
Numeric
Display
Internal
Address
Variable
Name
Meaning Default
Value
Range
d2.00 2FF00108 Store_Loop_
Data
1: Stores all control parameters except motor
parameters
10: Initializes all control parameters except
motor parameters
0 N/A
d2.01 60F90110 Kvp Sets the response speed of velocity loop N/A 0~32767
d2.02 60F90210 Kvi Time used to adjust speed control to
compensate minor errors
N/A 0~16384
d2.03 60F90308 Notch_N Notch/filtering frequency setting for a velocity
loop, used to set the frequency of the internal
notch filter, so as to eliminate the mechanical
resonance produced when the motor drives the
machine. The formula is F=Notch_N*10+100.
For example, if the mechanical resonance
frequency is F = 500 Hz, the parameter should
be set to 40.
45 0~90
d2.04 60F90408 Notch_On Enable or disable the notch filter
0: Disable the trap filter
1: Enable the trap filter
0 0~1
d2.05 60F90508 Speed_Fb_N You can reduce the noise during motor
operation by reducing the feedback bandwidth
of velocity loop. When the set bandwidth
becomes less, the motor responds slower.
The formula is F=Speed_Fb_N*20+100.
For example, to set the filter bandwidth to "F =
500 Hz‖, you need to set the parameter to 20.
45 0~45
d2.06 60F90608 Speed_Mode 0: Speed response after traveling through a 0 0~2