Kikusui PFX2000 Series, Руководство по эксплуатации

Страница: 21 / 104

PFX2000 Setup 1-5
■
Do not place the product on an inclined surface or location
subject to vibrations.
The product may fall or tip over causing damages and injuries.
■
Do not use the unit in a location subject to strong magnetic or
electric
fi elds.
The unit may malfunction and cause electric shock or fi re.
■
Do not use the product near highly sensitive measuring
instruments or transceivers.
The noise generated by the product may affect them
1.2.2 Rack Mounting
The PFX2331 and PFX2332 unit frames are designed on the assumption that they
be rack mounted in an EIA standard rack.
The PFX2011 and PFX2021 charge/discharge power supply units can be installed
or removed even if the unit frame is rack mounted.
• If you do not need to rack mount the unit frame, attach rubber feet (sold
separately) to the bottom of the frame. If you install the unit frame on a
desktop, for example, without attaching the rubber feet, the surface may be
damaged.
If you need rubber feet [P5-000-017], contact your Kikusui agent or distributor.
Attach the rubber feet to the appropriate locations at the four corners of the bottom
of the unit frame. Wipe the dirt or oil content thoroughly from the location where
the rubber feet are to be attached beforehand.
Kikusui provides the following racks for sale. For details, contact your Kikusui
agent or distributor.
•
KRO Series (KRO1600, KRO1250, and KRO900)
• RC322
CAUTION