Kikusui PFX2000 Series, Руководство по эксплуатации

Страница: 31 / 104

PFX2000 Setup 1-15
5. When the lock mechanism is activated, lift the unit by placing the hand
under the unit and pull out.
The lock is released. Hold the unit with both hands as shown in Fig. 1-6, and
pull it slowly out of the slot.
6. Attach the louver to the unit that you removed.
Fig. 1-6 Removing the Charge/Discharge Power Supply Unit
(PFX2011 Example)
Push the top section of the louver
(indicated with an arrow) to lift the
bottom section. a Remove the louver by holding
the lifted section and pulling in
the direction of the arrow. b
Remove the screw that is fixing
the unit in place. a b Pull down the lever toward you.
Hold the unit firmly with both hands so that
the back section of the unit does not hit the
frame when you completely pull the unit out
of the frame.
3.
4.
2.
5.