Keysight Technologies E4981A Скачать руководство пользователя страница 5

Страница: 5 / 383

Typeface Conventions

Bold

Boldface type is used when a term is defined. For

example:

icons

are symbols.

Italic

Italic type is used for emphasis and for titles of

manuals and other publications.

[Key]

Indicates the hardkey whose key label is Key.

[Key]

ITEM

Indicates a series of key operations in which you

press the [Key] key, make the item called

ITEM

(softkey or field name) on the displayed menu

using the cursor keys, and then press the softkey.

Sample Program

A sample program CD is furnished with this manual. The CD contains the sample

programs used in this manual.
The customer shall have the personal, non-transferable rights to use, copy, or modify

SAMPLE PROGRAMS in this manual for the customer’s internal operations. The

customer shall use the SAMPLE PROGRAMS solely and exclusively for their own

purposes and shall not license, lease, market, or distribute the SAMPLE PROGRAMS or

modification of any part thereof.
Keysight Technologies shall not be liable for the quality, performance, or behavior of the

SAMPLE PROGRAMS. Keysight Technologies especially disclaims any responsibility for

the operation of the SAMPLE PROGRAMS to be uninterrupted or error-free. The

SAMPLE PROGRAMS are provided AS IS.
keysight TECHNOLOGIES DISCLAIMS ANY IMPLIED WARRANTY OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Keysight Technologies shall not be liable for any infringement of any patent, trademark,

Technologies does not warrant that the SAMPLE PROGRAMS are free from

infringements of such rights of third parties. However, Keysight Technologies will not

knowingly infringe or deliver software that infringes the patent, trademark, copyright, or

other proprietary right of a third party.

Содержание E4981A
































































































































































































































































































































































































Результаты поиска

Содержание E4981A

Отзывы:

Бренды по названию

Популярные бренды

Keysight Technologies E4981A, Руководство по программированию

Результаты поиска

Содержание E4981A

Отзывы:

Бренды по названию

Популярные бренды