KaVo ESTETICA E50 Life Скачать руководство пользователя страница 152

Страница: 152 / 162

Instructions for use ESTETICA E50 Life

9 Troubleshooting

152 / 162

Malfunction

Cause

Remedy

The Satelec Mini LED

does not work.

Also refer to:

Instruc-

tions for use for the

Satelec Mini LED

▶

Also refer to:

Instructions for use for the

Satelec Mini LED

No cold light on the

handpieces.

Cold light not preselec-

ted.

▶

Preselect cold light.

The high-pressure lamp

or Multi LED on the

handpiece is defective.

▶

Replace the high-pressure lamp or Multi LED.

Also refer to:

Instructions for Use of the

handpiece

See also:

Instructions for Use of the handpiece

No heating function on

the multifunctional

handpiece.

Spray heating not

preselected.

▶

Pre-select spray heating.

No cold light on the

multifunctional hand-

piece.

Cold light not preselec-

ted.

▶

The heating function is preselected.

▶

Preselect cold light.

No spray in the instru-

ments.

No spray preselected.

▶

Preselect spray.

Close the ring for con-

trolling the spray on

the instruments.

▶

Open the ring for controlling the spray on the
instruments.

Spray at the instru-

ments is insufficient.

The spray nozzles are

dirty/clogged.

▶

Clean the spray nozzles according to the ac-
companying instrument operating instructions.

Leaks in instruments.

O-rings at MULTIflex or

motor coupling, grip-

ping sleeve or cannula

of the triple-function

handpiece are dam-

aged.

▶

Replace O-rings.

The suction hoses do

not have any suction.

Slides on the conical

sections are closed.

▶

Open the slide valve.

Sieves in suction con-

nector are blocked.

▶

Replace sieves.

Foot switch for vacu-

stop has been pressed.

▶

Release the foot switch.

Suction machine not

running.

▶

Turn on the suction machine.

▶

Check the suction machine fuse.

The amalgam separator

does not work cor-

rectly.

▶

Operating instructions of the amalgam separ-
ator.

Содержание ESTETICA E50 Life



































































































































































Результаты поиска

Содержание ESTETICA E50 Life

Отзывы:

Бренды по названию

Популярные бренды

KaVo ESTETICA E50 Life, Инструкция по эксплуатации

Результаты поиска

Содержание ESTETICA E50 Life

Отзывы:

Бренды по названию

Популярные бренды