KaVo ESTETICA E50 Life Скачать руководство пользователя страница 104

Страница: 104 / 162

Instructions for use ESTETICA E50 Life

4 Operation | 4.10 Using instruments

104 / 162

Replacing the KaVo MULTI LED lamp

Note

The KaVo MULTI LED bulb is a semiconductor element and may only be oper-
ated with direct current. To ensure proper function, the poles need to be in-
serted correctly.

▶

Push the holder

③

forward and pull the defective KaVo MULTI LED lamp

②

out of the socket.

▶

Insert new Kavo MULTI LED lamp (

Mat. no. 1.007.5372

The following may happen after you turn on the KaVo MULTI LED lamp:

▪ Case 1: KaVo MULTI LED lamp is on.

▪ Case 2: KaVo MULTI LED lamp is faint.

- Increase the cold light intensity on the unit until the desired light intensity
is reached.

▪ Case 3: KaVo MULTI LED lamp is red or off.

- Take KaVo MULTI LED lamp out of its socket as described above and re-in-
sert it after rotating it 180° about its axis.

4.10.5 Using the PiezoLED

CAUTION

Handpiece inserts can be damaged from long-term use, or when
dropped or bent.

They cannot be guaranteed to function properly.
Injury from insert breakage.

▶

Check the handpiece inserts before each use.

CAUTION

Sharp-edged tips.

Risk of injury.

▶

When not in use, always keep the supplied torque wrench attached to the
tip!

Note

Please comply with the enclosed "PiezoLED" Instructions for Use.

Operation via the MEMOdent menu

Operation with the foot control

▶

Press the "Instruments" foot pedal.

Содержание ESTETICA E50 Life



































































































































































Результаты поиска

Содержание ESTETICA E50 Life

Отзывы:

Бренды по названию

Популярные бренды

KaVo ESTETICA E50 Life, Инструкция по эксплуатации

Результаты поиска

Содержание ESTETICA E50 Life

Отзывы:

Бренды по названию

Популярные бренды