Kantronics MT1200, Руководство пользователя, Страница: 98 / 157

DAYSTR text
default yyyy-mm-dd hh:mm:ss
The DAYSTR command is used to set the FORMAT of your date/time display. DO NOT
enter an actual date or time, simply enter the form of the display you would like, using
the lower case letters m, d, h, y, and s as described below.
The format you enter is used for displayed time stamps.
The lower case characters m, d, y, h, and s have special meaning to this command and
will be replaced with data from the software clock. The lower case m will be replaced
with the minutes the first time it appears after a lower case h. If h, m, y, d, or s is
specified as a single character, the corresponding date/time element will be displayed
as a single digit if the value is less than 10. Entering two characters will force a two digit
display for values under 10. If the month is entered as three ms, it will be displayed as
the first three characters of the month name (JUL). You may also enter any other text
you wish, allowing you to add such things as your time zone.
➔
Remember ALL lower case m, d, y, h, and s will be replaced by actual values.
Some examples of setting the DAYSTR command and the resulting time/date display
are:
DAYSTR setting Displayed Date/Time
mm/dd/yy hh:mm:ss 07/16/02 12:14:22
d.m.y h:mm:ss 16.7.02 12:14:22
d.mm.yy h:mm 16.07.02 12:14
mmm d 20yy h:mm CST JUL 7 2002 12:14 CST
TIME hh:mm DATE: mmm dd, 20yy TIME 12:14 DATE JUL 07, 2002
➔ The DAYSTR command is used to define how date and time are to be displayed; it is
not used to enter an actual date and time (which you do by using DAYTIME). If you
enter an actual date and time with the DAYSTR command, your clock will appear to
stop.
See also: DAYTIME
DAYTIME yyyy-mm-dd hh:mm:[ss]
DAYTIME is used to enter a date and time (after which time and date are formatted for
display by the specifications given in DAYSTR).
When date and time are entered, using the input format specified in the command and
explained below, the values entered are used to set the software clock/calendar. The
software clock/calendar is then used for MHEARD logging, as well as for CSTAMP and
MSTAMP functions.
90