Kantronics MT1200, Руководство пользователя

Страница: 72 / 157

and start the password sequence but then disconnect, the penalty timer is in effect for
15 min.
Take care when using the remote access feature. You can change ANY command in
the TNC without restriction, but this can lead to problems. For instance, if you change
the INTFACE command to KISS and then send a RESET command, the remote TNC
will be placed into the KISS mode and will completely quit talking to the radio! Also, if
you connect to the MYREMOTE of a TNC and then issue a command like CONNECT
W1ABC, the remote TNC will indeed attempt to connect to the station, but there will be
no data sent to you from that connection. The connected data would be sent to the
serial port of that remote TNC. We urge EXTREME caution when using the remote
access! Note also that any command that causes a reset will disconnect you from the
remote access.
One other minor limitation applies to receiving data from the remote TNC. When you
give any command, the response is limited, so some commands will not fully display
their response, or no display will be available. For example, if you give the command
DISPLAY, there will be no display content. There is too much data to pass through the
remote connection from the MT1200. Any single command can be queried, and get a
display of its current setting.
64