Kantronics MT1200, Руководство пользователя, Страница: 122 / 157

RNRTIME is set in 10-second increments. If a connection stays in a remote device busy
state (continues to receive RNR frames) for RNRTIME, the TNC will disconnect. Setting
RNRTIME to 0 disables this function.
See also: MRESP
RPRINT text (text up to about 250 characters)
immediate
This is an immediate command, which sends the “text” string to the device attached to
the RS232 port. It is intended to allow a remote SYSOP (connected to the MT1200
through its MYREMOTE callsign) to send a string of data to output from the serial port
of the MT1200, to a device attached to its serial port.
RTEXT text (up to 128 characters)
default (blank)
This command sets the password string for use when accessing the MYREMOTE
remotely. When you connect to the MYREMOTE, the MT1200 will send three lines of
numbers, one of which must be properly decoded (matching position number with string
character) using this string.
For instance, if the RTEXT is set to “This is my RTEXT string” and you connect to the
MYREMOTE, the TNC would send three sets of random numbers. The numbers would
look like:
5 20 14 7 18 3
7 1 4 14 8 19
9 3 8 12 22 1
You must then pick ONE of these lines and decode the password string (i.e., assign
letters to each letter position). Let’s say you choose to decode line 3 (9 3 8 12 22 1).
Rewriting the RTEXT string to make this easier we have:
11111111112222
12345678901234567890123
This is my RTEXT string
Now, decoding the string, character 9 is “m” character 3 is “i”, character 8 is “ ” (i.e.,
blank), character 12 is “R”, character 22 is “n”, and character 1 is “T”. You must send
the following in response to the string of numbers:
114