Kantronics MT1200, Руководство пользователя

Страница: 100 / 157

When OFF, only one disconnect command (D) need be given to terminate an
unsuccessful connect attempt. If you are actually connected, the normal disconnect
sequence will occur.
When ON, a normal disconnect sequence will always occur (you will not be
disconnected until you receive an acknowledge of your disconnect or until the retry
count is exceeded). A second D is required to force a local disconnect independent of
the retry counter.
See also: DISCONNECT
DELETE n (n = $00 - $FF)
default $08 <Ctrl+H>
This command sets the character to be used as the delete character. When this
character is typed, the last input character is deleted. The most common settings are
$08 (backspace) and $7F (delete).
See also: BKONDEL
DIGIPEAT {ON | OFF | UIONLY}
default ON
When ON, any packet received that has MYCALL, or MYALIAS, in the digipeat list of its
address field will be retransmitted. Each station included in the digipeat list relays the
packet in the order specified in the address field. Digipeating takes place concurrently
with other TNC operations and does not interfere with normal connected operation of
the station. To disable digipeat operations (via MYCALL, or MYALIAS), set this
command to OFF.
If UIONLY is selected, the MT1200 will digipeat UI frames only. Connect type packets
will be ignored.
See also: HID, MYALIAS, MYCALL
DISCONNE [MYREM ]
immediate
When given without options, “disconnect” will initiate an immediate disconnect request.
A successful disconnect results in the display of “*** DISCONNECTED”. If the RETRY
92