Kantronics MT1200, Руководство пользователя

Страница: 40 / 157

Note: If you need further assistance on your radio cabling, contact the radio
manufacturer, your dealer, or a local amateur who has already installed a TNC.
Kantronics is not likely to have pin assignments for specific transceiver models.
The following diagrams, used for example only, show wiring connections between the
male connector for the MT1200’ “Radio” port and transceivers (including HTs) from
three major manufacturers: Yaesu, Icom, and Kenwood.
These diagrams may also apply to transceivers from other manufacturers, but you need
to check to be sure how your transceiver needs to be wired. See the section on
“Interfacing Hand-Held Radios” in the “Advanced Installation” appendix for further
information.
32