JVC VR-N1600E, Инструкция по эксплуатации

Страница: 91 / 136

83
The input/output port is the input/output terminal that is found
on each device registered with VR-N1600U/E. You can
register the input port as [Input events], and the output port
as [Outputs...].
A registered input/output port can be linked to an event as
described below. (
A
Page 90 [Specifying an Output Port])
●
Events can be used to start recording, send e-mails, move
the PTZ camera to a preset position, and control the
output port of the device. Events are divided into the four
types as described below.
I/O Settings
1
Click the [I/O Setup...] button on the [Camera
Record Setting] screen
●
The [I/O Setup] screen appears.
●
The [I/O Setup] screen enables you to add input
events, VMD events and outputs that can be used by
the network cameras.
Note :
●
The available events differ among network cameras.
Camera Input/Output Port
and Events
Input events Registers input signals of sensors
connected to the input port of the device
as an [Input events].
Generic events Registers as a generic event.
VMD events Registers the detected image motion as
a VMD (Video Motion Detection) event.
Event buttons Event generated by buttons that enable
manual operation.
A
B
C F
E
D
[I/O Setup] Screen
Item Description
A
Add new
event... For specifying input events for the
device selected in the [Defined
events] list. You may be able to
specify multiple input events for some
devices.
Click the [
＋
] mark next to the device
in the [Defined events] list, select the
preset input event, and click the [Add
new event...] button to specify a timer
event. (
A
Page 85)
B
Add new
output event... Displays the [Add new output] screen.
(
A
Page 86)
C
Add VMD
Event(motion
Detection) For specifying a VMD (Video Motion
Detection) event for the device
selected in the [Defined events] list.
Only one VMD event can be defined
for each camera.
Note :
●
To avoid the risk of generating an
excessive number of VMD events,
a new VMD event cannot occur
within five seconds after the
occurrence of the last VMD event.
●
VMD events cannot be sent by e-
mail.
D
Advanced... Displays the [Advanced...] screen.
(
A
Page 86)
E
Remove
selected For deleting the event selected in the
[Defined events] list.
F
Edit
selected... For editing the event selected in the
[Defined events] list.
VR-N1600_J.book Page 83 Wednesday, August 8, 2007 3:32 PM