JVC VR-N1600E, Инструкция по эксплуатации

Страница: 94 / 136

86
Applications
Specifying an Output
1
Select the camera for specifying the event from
the [Defined events] list on the [I/O Setup]
screen
2
Click the [Add new output event...] button
●
The [Add New Output] screen appears.
3
Specify the output connection destination,
output holding time, and output name
Note :
●
The [Add new output event...] button is disabled if there is
no output available for the network camera.
[Advanced] Screen
The [Advanced] screen enables you to specify network
settings for handling events.
1
Click the [Advanced...] button on the [I/O Setup]
screen
●
The [Advanced] screen appears.
Camera Input/Output Port
and Events (continued)
2
1
A
D
B
C
E
[Add new output] Screen
Item Description
A
External
output
connected to Displays the device name for which
output is specified. (This is a read-
only field.)
B
Output
connected on For selecting which destination to
connect the output to.
C
Keep output
for For specifying the output holding
time in units of 1/10 seconds or
seconds.
D
External
output name For specifying a name for the output.
Memo :
●
Output names must not contain
the following characters : < > & ' " \
/ : * ? | [ ].
E
Test Output Click this to perform a test on the
output settings.
[I/O Setup] Screen
Click
A
B
C
D
[Advanced] Screen
VR-N1600_J.book Page 86 Wednesday, August 8, 2007 3:32 PM