JVC VR-N1600E, Инструкция по эксплуатации

Страница: 84 / 136

76
Applications
The [Camera Settings] screen enables you to specify of the information on cameras. The number of configurable parameters
available on the [Camera Settings] screen may be limited if the camera does not come with the PTZ features or if the device
connected to the network encoder (IP video server) is not a camera.
To display the [Camera Settings] screen, click the [Camera Settings...] button on the [Edit device settings] screen.
PTZ Camera Settings
(COM1/COM2)
Item Description
A
PTZ Camera Section
Some of the connected cameras
are Pna/Tilt/Zoom cameras Select this check box if any of the cameras connected to the network encoder (IP
video server) is a PTZ camera.
If the PTZ features are not available on the device, the check box is disabled.
P/T/Z type controlled through
COM1/COM2 For selecting a control method that conforms with the PTZ camera from the list if the
PTZ camera is controlled through the COM1 or COM2 port of the network encoder
(IP video server).
If all the PTZ cameras are not controlled through the COM1 or COM2 port, select
A
None
B
.
B
Camera List On the camera list, the camera numbers on the device are listed in sequence.
For example, the top line corresponds to camera number 1, and the second line
corresponds to camera number 2, and so on.
To change the camera settings, select a camera number from the list, specify the
required information in the following fields, and click the [Apply] button.
C
Camera Name Name used to identify the selected camera. Do not assign a camera name that is
used by other devices.
Note :
●
The “Camera Name” is not the name specified for the camera unit, but for
identifying the camera on VR-N1600U/E.
D
Camera Number For specifying the camera number.
Note :
●
Do not assign a camera number that is used by other cameras.
A
B
C
D E F G
[Camera Settings]
Screen
VR-N1600_J.book Page 76 Wednesday, August 8, 2007 3:32 PM