JVC VR-N1600E, Инструкция по эксплуатации

Страница: 79 / 136

71
Item Preset Values Description Reference
Page
B
IP Lease Parameter
^
Start Address
䢇
80 For specifying the first IP address to be assigned to the
cameras.
Unit
䢇
20Units
1Unit to 99Units
For selecting the number of IP addresses to be assigned to
the cameras. The selected number of IP addresses will be
assigned starting from the first IP address.
Subnet Mask
^
For specifying the subnet mask for the cameras.
Gateway
^
For specifying the gateway for the cameras.
DNS Server
Primary
䢇
192.168.0.253 For specifying the primary DNS for the cameras.
Secondry
䢇
192.168.0.252 For specifying the secondary DNS for the cameras.
Domain Name
^
For specifying the domain name for the cameras.
C
Lease Time Limit
䢇
No
Yes
For specifying the valid period of the IP address assigned to
the cameras.
If
A
Yes
B
is selected, you can set the lease time in units of
hours. (Setting value: 1 hour to 99 hours)
^
D
Client
䢇
Only Camera
Any Client
For selecting whether to apply restrictions on the device when
assigning the IP address. If
A
Only Camera
B
is selected, IP
address will only be assigned to the corresponding camera. If
A
Any Client
B
is selected, IP address will be assigned to all
devices.
^
E
IP Information
^
The [IP Information] list contains information on the IP
address of the automatically detected camera, MAC address,
number of video CH, manufacturer, and model.
Click [Auto Detect] to start auto detect and display the result.
The camera at the top of the list is used with priority.
You can sort the order of the detected cameras by clicking the
Sort button.
The different types of sort buttons include the [IP], [MAC],
[CH], [MAKER], and [MODEL] sort buttons.
After selecting the detected camera, click the [Up] or [Down]
button to alter the order of the cameras.
Deselect the check box of any camera that you are not using.
Memo :
●
When multicast packets are configured such that they do
not pass through the network equipment, such as a
switching hub, the Auto Detect of the camera may not
function properly.
A
Page 100
A
Page 14
F
Reserve MAC
Address
^
Configure the [Reserve MAC Address] if you want to assign a
specific IP address to the cameras. A specific IP address is
always mapped to a MAC address. Enter a value in the [MAC]
and [IP] fields, and click [Add] to set the addresses. To cancel
the setting, select a displayed MAC and IP address and click
[Del].
^
G
OK/Cancel
^
Clicking this button closes the setup screen and starts the
assignment of IP addresses.
^
VR-N1600_J.book Page 71 Wednesday, August 8, 2007 3:32 PM