JVC VR-N1600E, Инструкция по эксплуатации

Страница: 23 / 136

15
2
Check to ensure that the camera is detected
●
After the message disappears, a list of detected
cameras is displayed.
●
If all the cameras are not detected, press the [Auto
Detect] button again. If doing so does not solve the
problem, check the connection with the cameras and
the IP address of the cameras.
3
Swap the order of detected cameras
●
Select SORT button using [SKIP] button and press
[16/ENTER] button. The order of detected cameras
can be sorted.
●
The different types of sort buttons include the [IP],
[MAC], [CH], [MAKER], and [MODEL] sort buttons.
●
Select list using [SKIP] button to select [2/D], [10/0/E].
After selecting camera, press
[SKIP]] button to select
[Up], [Down]. When [16/ENTER] is pressed, the order
of cameras will be swapped.
●
Deselect the check box of any camera that you are not
using.
Memo :
●
The camera in the upper position of list order has the first
priority. Camera number will be registered in the list order.
4
Use the [SKIP] button to select [Entry], followed
by pressing the [16/ENTER] button
●
The camera that is automatically detected is registered
in the system.
5
Use the [SKIP] button to select [OK], followed by
pressing the [16/ENTER] button
●
The [Configure Device] screen appears.
6
Enter the password for the network camera
●
Press the [KEY] button to display the software
keyboard. (
A
Page 20)
●
Use the keypad to move the mouse cursor over the
software keyboard.
●
Pressing the [16/ENTER] button inputs the characters
on the keyboard into the password field.
7
After password entry is complete, press [KEY]
again the close the software keyboard
8
Use the [SKIP] button to select [OK], followed by
pressing [16/ENTER]
9
Repeat the steps from 5 to 7 for every detected
camera
●
The [Camera Record Setting] screen appears.
VR-N1600_J.book Page 15 Wednesday, August 8, 2007 3:32 PM