IMPORTANT
• Lock the boom assembly for transport so that the crane will not move by itself
• Operate the boom system into a parking position that prevents free swinging of
the grapple during transportation.
• Operate the boom system into a parking position that prevents the grapple from
hitting the operator’s control station in case of accidental operation of the crane.
WARNING
Do not park the
grapple horizontally
(an example of
incorrect position is
shown in the
picture).
• The stabiliser legs and stabiliser extensions must be retracted and locked during transport.
• Take the total height of the crane and the load into consideration!
• When moving the vehicle, ensure that there is nobody at the crane’s control position.
• When the crane is installed on a detachable console at the rear of the vehicle, be especially
cautious when uncoupling or recoupling the crane. At such times, nobody is allowed to be near
the crane’s control position.
• Ensure that the load is properly tied.
11.3.1. For cabins [Option]
• Always lower the cabin to the end position
• Close all doors and windows
• Pull down the protective curtain on the cabin front door
• When moving the vehicle, ensure that there is nobody at the crane’s control position.
• When the crane is installed on a detachable console at the rear of the vehicle, be especially
cautious when uncoupling or recoupling the crane. At such times, nobody is allowed to be near
the crane’s control position.
• Ensure that the load is properly tied.
Ending crane operation
66
Jonsered 1188S CE
