Johnson & Johnson Surgical Vision Veritas, Руководство оператора

Страница: 166 / 270

Wireless Foot Pedal Setup Z370584 Rev. D
7-8
System Configuration
Figure 7-7 — Wireless Pairing Instructions
7. The system communicates the appropriate data to the foot pedal. The system displays a
progress screen during the pairing process.
8. When pairing completes, the progress screen closes and the system displays the
message: “The foot pedal is now paired with the system”.

If the blue light is on, the wireless foot pedal is paired.

If the blue light is blinking the wireless foot pedal is not paired.

If the green light is on, the batteries in the foot pedal are charged.

If the green light is blinking, the batteries in the wireless foot pedal need to be charged.
See
“Charging Options for Wireless Foot Pedals” on page 10-4 .
9. Test the foot pedal or tap Finished to close the test screen.
10. Tap Exit to close the Configuration screen.
NOTE: If you have problems pairing the Advanced Control Pedal (ACP), remove any other
Bluetooth devices from the area. Multiple Bluetooth devices can affect the pairing
process.
Wired Pairing
1. On the main screen, tap Configuration .
2. Tap Wireless Setup .
3. On the Wireless Setup dialog box, tap the Advanced Control Pedal button ( Figure 7-4 ).
4. On the Foot Pedal Pairing screen, tap Wired Pairing ( Figure 7-6 ). The system displays the
message: “Ensure the cable is attached to the foot pedal”.
5. Tap OK .
6. The system communicates the appropriate data to the foot pedal. When the system
receives the appropriate data back from the foot pedal the system displays the message:
“Remove the cable from the foot pedal”. The system displays a progress screen during
the pairing process.
7. When pairing completes, the progress screen closes and the system displays the
message: “The foot pedal is now paired with the system”.
8. Test the foot pedal or tap Finished to close the test screen.
9. Tap Exit to close the Configuration screen.