Johnson & Johnson Surgical Vision Veritas, Руководство оператора

Страница: 111 / 270

Surgeon Settings
Z370584 Rev. D Foot Pedal Setup
5-31
Figure 5-26 — Advanced Control Pedal Testing
7. Press the foot pedal down fully to position 3. As the foot pedal travels through positions 1
and 2 to position 3, the progress bar shows its current state. When the pedal reaches the
bottom of position 3, the progress bar should be solid green.
8. Press each of the four switches. When a switch is tapped, the On button for that switch
turns green and its Off button turns white. When you release the switch, the On button
for that switch turns white and its Off button turns green.
9. Tap Finished when you complete the testing of your foot switch.
10. Tap Exit to close the Foot Pedal Set Up screen.
11. To test the foot pedal without performing a calibration, tap Test and follow the
instructions on the screen.
Advanced Linear Pedal Setup
NOTE: Only use the JJSV specified replacement battery in the Advanced Linear Pedal to
ensure correct system performance. See “Charging Options for Wireless Foot
Pedals” on page 10-4.
The Advanced Linear Pedal does not need to be calibrated.