Jofemar COFFEEMAR G-500 V2, Руководство пользователя

Страница: 38 / 79

MNP37M03GBV00 Date: 24-11 Rev. 0
Page 38 of 79
1
1
2
Detail "A"
Detail "A"
To change the cup delivery cogwheels, do as follows:
1.
Remove the cup storage tubes together with the star-shaped shaft.
2. Lift cogwheel blocking shaft (no 1 fig. 6.09.2) by holding the end of the shaft
that sticks out of the cup dispenser lid and pulling it until the other end comes
out of its recess.
3. Grip the lower cup dispenser bushing (no 2 fig. 6.09.2) and turn it in one or the
other direction until the indicator arrow coincides with the desired position.
4. Release the shaft that will return to its recess thanks to the spring attached to
it. To ensure the shaft is properly anchored, press the shaft down to check that
it has gone all the way into its recess.
The parts of the cup dispenser are:
6
8
9
2
4
7
5
1
3
6
Figure 6.09.2
1.
Cogwheel position locking
shaft
2. Cup dispenser lower bushing
Figure 6.09.3
1.
Cup dispenser lid
2. Cup dispenser base
3. Cup dispenser upper bushing
4. Cup dispenser lower bushing
5. Cup dispenser crown ring
6. Cup dispenser delivery cogwheel
7. Cup delivery drive cogwheel
8. Cogwheel turning geared motor
9. Cogwheel turning microswitch
10. Cup sensor rocker arm
11. Cup sensor photocells
12. Cup sensor photocell anchoring
system
13. Cup slide
14. Cup dispenser
15. Cup storage turning geared
motor
16. Cup storage turning gear
17. Cup storage turning shaft
18. Cup storage position microswitch
19. Cup dispenser harness
connector
20. Cup storage assembly star-
shaped shaft
21. Cup storage assembly
22. Cup collector
23. Sugar collector
24. Cup collector supplement