MNP37M03GBV00 Date: 24-11 Rev. 0
Page 52 of 79
6
5
4
3
1
2
7
figure 6.12.5
1.
GSM modem
2.
Interface card
3.
Modem plate separator
4.
Separator block
5.
DIN7981 3.9x13 mm screws
6.
DIN7981 3.9x6.5 mm screws.
7.
Upper light plate
To install the modem kit follow the steps below:
1.
Screw the modem plate separator to the upper light plate using two 3.9x6.5
mm screws (see figure 6.12.5)
2.
Place the modem on the plastic separator and screw it to the same plate
using 2 3.9x6.5 mm screws.
3.
Insert the 4 separator blocks in the interface card and screw it to the plate
using 4 3.9x13 mm screws
4.
To install the modem aerial, you need to remove the upper angle plate that
protects the machine’s lower photograph, so the aerial can be inserted
through this hole.
5.
Remove the plastic covering the adhesive of the GSM aerial (part
code 9042005) and stick the aerial to the Omega Modem Aerial Support (part
code 7061017)
6.
Stick the Thermolene GSM Aerial Attachment (part code 2400135) to the
GSM Aerial
7.
Pass the assembly through the opening left by the angle plate you removed
and fix it to the door using two hex screws (part code 1311047) and 2 hex
nuts (part code 1321001) see figure 6.12.5.1
8.
Pass the GSM aerial wire through one of the holes in the door, so you can
connect it to the modem interface card
Содержание COFFEEMAR G-500 V2
Страница 1: ...MNP37M03GBV00 Date 24 11 Rev 0 Page 1 of 79 INGL S COFFEEMAR G 500 V2 USER S MANUAL...
Страница 26: ...MNP37M03GBV00 Date 24 11 Rev 0 Page 26 of 79 6 3 Electrical drawings Cabinet electrical drawing...
Страница 27: ...MNP37M03GBV00 Date 24 11 Rev 0 Page 27 of 79 Door electrical drawing...
