Jetter JVM-407B-HMI, Руководство пользователя

Страница: 83 / 300

Jetter AG 83
JVM-407B Initial commissioning
Preparatory work for initial commissioning
The JVM-407B in delivered condition has got IP address 192.168.10.15.
Configure the Ethernet interface of your PC so that it is able to communicate
with the JVM-407B via this IP address.
The JVM-407B only powers up if the supply vU BATT is applied to the
ignition (+).
To prevent the application program from being launched, press function keys
F1 and F3 simultaneously.
It may happen that the device does not react after boot-up. This condition,
however, lets you access the device using FTP or JetSym.
The default application program launched on the JVM-407B after powering up
displays the following input mask on the display.
F1
+10
-10
+
-
F2
F3
F4
NodeID: 30
IP-Adresse: 192.168.10.15
MAC-Adresse: 00-50-cb-00-af-30
OS-Version: 1.15.1.0
The node ID displayed is the address of the CANopen® bus # 1 set in the
JVM-407B. This address can be set by using the function keys F1 to F4.
The function key F1 increases the address in steps of 10. The function key F4
decreases the address in steps of 10.
The function key F2 increases the address in steps of 1. The function key F3
decreases the address in steps of 1.
The IP address, MAC address and OS version are also displayed.
Establishing an Ethernet
connection
Requirement for
power-up
Skipping the application
program during launch
Default display