Jetter JVM-407B-HMI, Руководство пользователя

Страница: 10 / 300

10 Jetter AG
1 Safety instructions
Basic safety instructions
This device complies with the valid safety regulations and standards.
Jetter AG attaches great importance to the safety of the users.
Of course, the user should adhere to the following regulations:
 Relevant accident prevention regulations

Accepted safety rules
 EC guidelines and other country-specific regulations
Usage according to the intended conditions of use implies operation in
accordance with this User Manual.
The device has been designed for use in commercial vehicles and mobile
machines. The device JVM-407B is an HMI with integrated controller for
exchange of data with peripheral devices.
The HMI JVM-407B meets the requirements of the European Automotive EMC
Directive for electric/electronic subassemblies.
Operate the JVM-407B only within the limits set forth in the technical
specifications. Because of its low operating voltage, the JVM-407B is
classified as a SELV (Safety Extra-Low Voltage) system. Therefore, the HMI
JVM-407B is not subject to the EU Low Voltage Directive.
The device must not be used in technical systems which to a high degree
have to be fail-safe, such as, for example, in ropeways and aeroplanes.
The JVM-407B is no safety-related part as per Machinery Directive
2006/42/EC. This device is not qualified for safety-relevant applications and
must, therefore, NOT be used to protect persons.
If you intend to operate the device at ambient conditions not being in
conformity with the permitted operating conditions, please contact Jetter AG
beforehand.
Depending on the life cycle of the product, the persons involved must possess
specific qualifications. The qualifications required to ensure safe handling of
the device at different phases of the product life cycle are listed below:
Phase of the product life
cycle
Minimum qualification
Transport/storage: Trained and instructed personnel with knowledge in
handling electrostatically sensitive components
Mounting/installation:
Specialized personnel with training in
electrical/automotive engineering, such as automotive
mechatronics fitters
Commissioning/
programming:
Trained and instructed experts with profound
knowledge of, and experience with,
automotive/automation technology, such as
automotive engineers for mobile machinery
Operation:
Trained, instructed and assigned personnel with
knowledge in operating electronic devices for mobile
machinery
Introduction
Intended conditions of
use
Usage other than
intended
Personnel qualification