Jetter JVM-407B-HMI, Руководство пользователя

Страница: 91 / 300

Jetter AG 91
JVM-407B Initial commissioning
Creating and configuring a visualization project in JetSym
The programming tool JetSym STX lets you create visualizations for the HMI
JVM-407B. This topic covers the following:
 Creating a project in JetSym STX

Configuring the controller hardware
 Including the visualization library JVER-STX
 Creating a program that can be compiled and transferred to the HMI
The following requirements must be satisfied:
 JetSym has been installed on the PC used.
 JetSym has been licensed (see online help in JetSym).
 The controller has been connected to the same network as the PC.
 An active Ethernet connection between controller, HMI, and PC has been
established.

Initial commissioning in JetViewSoft has been completed.
To create a new programming project in JetSym, proceed as follows:
Step Action
1 Launch JetSym
2 Open the menu File . Select menu item New .
Result:
The dialog box New opens.
3
Select
JetSym STX project
as the project type.
4 Enter the project name.
Introduction
Prerequisites
Creating a project