Jetter JVM-407B-HMI, Руководство пользователя

Страница: 11 / 300

Jetter AG 11
JVM-407B Safety instructions
Phase of the product life
cycle
Minimum qualification
Decommissioning/
disposal:
Specialized personnel with training in
electrical/automotive engineering, such as automotive
mechatronics fitters
For safety reasons, no modifications and changes to the device and its
functions are permitted.
Any modifications to the device not expressly authorized by Jetter AG will
result in a loss of any liability claims to Jetter AG.
The original parts are specifically designed for the device. Parts and
equipment from other manufacturers have not been tested by Jetter AG
and are, therefore, not released by Jetter AG.
The installation of such parts may impair the safety and the proper functioning
of the device.
Any liability on the part of Jetter AG for any damages resulting from the use of
non-original parts and equipment is excluded.
The JVM-407B contains electrostatically sensitive components which can be
damaged if not handled properly.
To exclude damages to the JVM-407B during transport it must be shipped in
its original packaging or in packaging protecting against electrostatic
discharge.
 Use an appropriate outer packaging to protect the JVM-407B against
impact or shock.

In case of damaged packaging inspect the device for any visible damage.
Inform your freight forwarder and Jetter AG.
When storing the JVM-407B observe the environmental conditions given in the
technical specification.
The operator is not allowed to repair the device. The device does not contain
any parts that could be repaired by the operator.
If the device needs repairing, please send it to Jetter AG.
When disposing of devices, the local environmental regulations must be
complied with.
Modifications and
alterations to the module
Transport
Storing
Repair and maintenance
Disposal