Jetter JetControl 365MC, Руководство пользователя

Страница: 42 / 148

Jetter AG Electrical connection | 6
User Manual – JetControl 365MC 42 / 148
6.3.1 Configuring error states
JetSym lets you configure the JC-365MC controller.
Commissioning
ü
JetSym has been installed on the PC.
ü
JetSym has been licensed (see JetSym Online Help).
ü
Limitations to be taken into account when engineering a JX3 station have
been observed.
1. Make sure that the power supply is disconnected!
2. Assemble any JX3 modules as required to form JX3 station. Take into ac-
count the restrictions applying to the design of a JX3 station.
3. Use an Ethernet cable to connect the JC-365MC controller and the PC.
4. Set an IP address on the JC-365MC controller (see IP configuration [
}
51] ).
5. On the PC, set an IP address which differs from the IP address of the con-
troller. Example: The controller has got IP address 192.168.1.1. Thus, for the
PC, IP address 192.168.1.20 can be used. Make sure that the first 3 elements
of the IP addresses are identical.
6. Switch on the power supply for the JX3 station.
7. Launch JetSym. Configure the JX3 station following the sample program.
8. Configure the JX3 station using the Hardware Manager.
9. Enter the sample program.
10. Upload the program to the controller.
INFO
Number of connectible expansion modules
To find out about the exact amount of connectible expansion modules use the
JX3-sysbus_configurator_xxx_e which is available for download from our
homepage .
INFO
Further information
For more information on this subject, refer to the JetSym Online Help.