Jetter AG
Identification and Configuration | 7
User Manual – JetControl 365MC
72 / 148
Operating system update using the programming tool
The JetSym programming tool lets you transfer an OS file to a JX2 module on the
JX2 system bus or to a JX3 module on the JX3 system bus via the controller in a
convenient way.
Performing the
update
ü
The mode selector of the controller is in the
RUN
or
STOP
position before the
controller is switched on.
ü
An OS file for the module is available.
ü
A UDP/IP and a TCP/IP connection between programming tool and controller
is possible.
ü
The number of the IP port is set in the configuration memory as IP basic port
number for the JetIP communication.
ü
The operating system is running.
ü
The controller has initialized the system bus including the connected modules
without errors.
ü
Make sure the controller remains energized during the operating system up-
date.
ü
The modules are and remain switched on.
1.
In JetSym, from the
Build
menu select menu item
Update OS...
.
ð
The file selection dialog opens.
2.
Select the new OS file here.
ð
JetSym prompts a confirmation dialog.
3.
Confirm by clicking
Yes.
ð
JetSym prompts an input box for entering the interface type and module
number.
4.
Enter the interface type (2 for the JX2 system bus or 1 for the JX3 system
bus) and the module number (2 ... 23).
5.
Launch the OS upload by clicking the button
Update
.
6.
Wait until the update process is completed. If you want to update further mod-
ules, repeat steps 1 ... 6.
7.
Set the mode selector to
STOP
or
RUN
.
8.
To activate the transferred OS, re-boot the controller.
