manualshive.com logo in svg

Jetter JetControl 365MC, Руководство пользователя

Поделиться
Скачать
Jetter JetControl 365MC Скачать руководство пользователя страница 73

Jetter AG

Identification and Configuration | 7

User Manual – JetControl 365MC

73 / 148

Updating the operating system by means of FTP

An FTP client lets you transfer an OS file to a JX2 module on the JX2 system bus
or to a JX3 module on the JX3 system bus of the controller.

Performing the 
update

ü

The mode selector of the controller is in the RUN or STOP position before the
controller is switched on.

ü

An OS file for the module is available.

ü

An FTP connection to the controller is possible.

ü

The login parameters for a user with administrot or system rights are at hand.

ü

The operating system is running.

ü

The controller has initialized the system bus including the connected modules
without errors.

ü

Make sure the controller remains energized during the operating system up-
date.

ü

The modules are and remain switched on.

1.

Establish an FTP connection to the controller.

2.

Log in with administrator or system rights.

3.

Navigate to the directory 

/System/JX2-Slave/OS

 or 

System/JX3-Module/OS

.

4.

Transfer the OS file.

5.

Wait until the update process is completed.

6.

Clear the FTP connection.

7.

Set the mode selector to STOP or RUN.

8.

To activate the transferred OS, re-boot the controller.

Operating system update from an SD card

An automatic OS update of a JX2 or JX3 module from an SD card can be exe-
cuted via the AutoCopy function.

 INFO

Further information

For more information on this subject refer to the application-oriented manual 

File

System

 available for download from our 

homepage

.

Содержание JetControl 365MC





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды